Loading ...
Loading ...
Loading ...
7
ENG
• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify or sever water inlet hose.
Connect manually, do not use tools. Check if the connections are tight.
WARNING!
Connect Water Supply Hose
Connect the water supply hose to the
water inlet valve and a water tap with cold
water as indicated.
NOTE
There are two ways to place the end of drain hose:
Drain Hose
WARNING!
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.
1.Put it into the water trough. 2. Connect it to the branch drain pipe of the
trough.
Water trough
CAUTION!
• Before washing, please make sure it’s installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual water and to
neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, start
the Cotton program at 90°C without laundry and detergent.
OPERATIONS
Quick Start
It’s recommended to calibrate the washing machine, so that provide the best performance.
The appliance is able to detect the amount of laundry loaded. This function is optimizing the product
performance by minimizing energy and water consumption, saving you money and time. For this reason it’s
recommended to calibrate the appliance for best use.
1. Remove all accessories from the drum and close the door;
2. Insert the mains plug to the socket;
3. Switch on the washing machine and press “Delay” and “Temp.” simultaneously for 10 seconds until “t19”
is displayed;
4. Press
start the appliance and wait till “****” is displayed.
CALIBRATION
Loading ...
Loading ...
Loading ...