Loading ...
Loading ...
Loading ...
4
■ All units should be plugged into a grounded and properly-sized
electrical outlet with appropriate overcurrent protection. Please refer
to the electrical requirement on the nameplate.
NEMA plugs
NEMA 5-15P NEMA 5-20P
If you do not have the right outlet have a certified electrician install the correct
power source.
■ Please make sure that your unit has its own dedicated outlet. Do not
use an extension cord.
After proper installation, please plug the cord and turn on the power switch.
■ Operation instruction of temperature controller
－Cooler model
Setting the set point (desired temperature value)
To display or set the set point, proceed as follow:
1) press SET for 1s, the set value will start flashing after a few moments;
2) increase or decrease the value using UP or DOWN;
3) press the SET button again to confirm the new value.
－Freezer model
Setting the set point (desired temperature value)
To display or set the set point, proceed as follow:
4) press the SET button for more than 1 second to display the set point;
5) increase or decrease the value of the set point, using the and
respectively,until reaching the desired value;
Loading ...
Loading ...
Loading ...