Loading ...
Loading ...
Loading ...
16
49
1
2
3
4
5
6
5
8
11
7
9
10
12
24
41
46
47
34
35
36
37
23
22
52
13
14
15
16
17
18
19
20
21
25
26
27
28
39
38
22
45
50
44
43
32
29
31
30
40
57
53
51
59
17
54
58
55
17
56
33
48
60
AR630TSS / AR630TSS-H
OT
U
NLOADER
5
1. Connect the high pressure hose to the pressure washer with the twist
fast coupler and tighten securely. Fasten wand and gun together and
connect gun/wand to high pressure hose.
Tighten all connections and replace worn parts before
starting the machine. Sudden release of high pressure
streams may result if connections detach during use. This
can cause serious injury. Never disconnect any part of
the unit while the machine is running or before relieving
system pressure, it is dangerous. Seek medical attention
if an injury ever occurs.
2. Remove the red plug from the pump crankcase and install the black
dipstick. Always check that the oil level is full before operating.
3. Oil level can be checked in two places.
4. First, on back side of pump sight glass, level should be half way.
5. Second, on dip stick, oil should read between the indentation on the
dip stick.
A
SSEMBLY
I
NSTRUCTION
(
CONT
)
A
SSEMBLING
O
PERATING
I
NSTRUCTIONS
B
EFORE
S
TARTING
THE
P
RESSURE
W
ASHER
1. Read all safety instructions throughout the manual.
2. Place unit on dry, rm, level ground for optimum lubrication of pump.
3. Check oil levels prior to each use.
4. Tighten all hoses and connections. Check parts and replace if need-
ed.
5. When the unit is attached to a pressure main and the nozzle is in the
low pressure setting, purge air from system by squeezing gun trigger
before starting machine. Let water run until there is a steady stream
of water coming out of the nozzle.
Loading ...
Loading ...
Loading ...