Loading ...
Loading ...
Loading ...
13
1. Power button
Press this button to turn the unit on and off.
2. Mode button
Press this button to cycle between the 3 modes: cool (full A\C cooling
with temperature setting), fan (just fan operation without any
temperature setting) and dry (fan operation plus dehumidification). In
dry mode, water will collect inside the unit, and must be drained by
removing the plug from the middle of the back of the unit. If the tank is
full, “FL” will appear on the display to indicate that it needs to be
drained. In dry mode, the unit will stay on low fan speed, and maintain
a temperature of 62 degrees.
3. Temperature buttons
Press these buttons to increase and decrease the set temperature.
Press these buttons simultaneously to switch the temperature setting
between Fahrenheit and Celsius. This can also be switched by pressing
the C/F button on the remote control.
4. Speed button
Press this button to switch between the three fan speeds, high,middle
and low.
5. Timer Button
Press this button to set the unit to turn off after a specified amount of
time. Pressing this button while the unit is turned off will allow you to
set the unit to turn on after a specified amount of time. The timer can
be set anywhere between 1 and 24 hours.
6. Time/Temperature Display
This window displays the set temperature, or the set time while using
the timer function.
7. Remote control sensor
Point the remote control toward this sensor when using it.
8. Temperature mode button
Press this button on the remote to switch between Fahrenheit and
Celsius on the temperature display window. This can also be switched
by pressing the temperature control buttons on the main control panel
simultaneously.
9. Swing button
In cooling mode, Press the swing button, the blade will swing up and
down to change the direction of the wind.
Loading ...
Loading ...
Loading ...