Loading ...
Loading ...
Loading ...
- 13 -
E2
Fan Fault
E3
Compressor start failed
E4
Low Rotational Speed of Compressor
E5
Controller module temperature too high
E6
Open or Short Circuit of NTC
III. Abnormal Noise
1.The car refrigerator is not placed smoothly.
2.Touch a wall or other object.
3.There are parts loose or falling off inside.
IV. Condensation on Refrigerator Surface
When the ambient air humidity exceeds 75%, slight condensation will occur on
the box surface, which is normal.
Failures and Solutions
△E1: Low Input Voltage
Failure 1: Insert the refrigerator power cord into the cigarette lighter before the car
starts. Solution 1: Wait a while to connect the car after it starts.
Failure 2: The input voltage of the adapter is too low.
Solution 2: Adjust the battery protection level to middle-voltage or low-voltage. If it
doesn't work, please replace a new adapter.
△E2: Fan Fault
Please replace a new fan when identify there is a fan malfunction.
△E3: Input Voltage Fault Due to Compressor Frequently Start
When the refrigerator is used in car and E3 appearing, Please shut down for 5
minutes and restart it.
Loading ...
Loading ...
Loading ...