Loading ...
Loading ...
Loading ...
3 Rear
Facing
38
5. Place Car Seat Rear-Facing in Back
Seat of the Vehicle
Place rear-facing in vehicle seat and center
the car seat between the lower LATCH
anchors. The base should sit as flat as
possible on the vehicle seat.
Note: Make Sure Base is a minimum of
80% on Vehicle Seat.
6. Extend the InRight™ LATCH Strap
For easier installation, extend the InRight™
LATCH strap to its maximum length by
pressing the grey button and pulling on the
strap.
7. Check the Level Indicator
Vehicle MUST be on level ground.
Check the level indicator on the car seat.
The bubble must be completely within
the blue zone.
Adjust the recline until the bubble is
completely within the blue zone.
8. Attach InRight™ LATCH Connectors
to Vehicle’s Lower Anchors
LATCH strap should lie flat and not be
twisted.
LATCH can only be used if the vehicle
anchor spacing is 11” (28 cm) from the
center of one LATCH anchor to the center
of the other LATCH anchor.
Make sure that the red button faces away
from the car seat and the arrows are
pointing up. The InRight
TM
LATCH strap
should not be twisted.
Loading ...
Loading ...
Loading ...