Loading ...
Loading ...
Loading ...
3
3. INSTALLATION INSTRUCTIONS
A. Installing on the concrete wall:
3.1.1 Unscrew the fixing screws to remove
the mounting plate from the back of the main
body.
3.1.2 Determine the mounting location with
the mounting plate. Drill holes and insert the
Zinc-Plated Steel Hex-Nut-Head Sleeve
Anchor (not included).
3.1.3 Tighten the nuts to secure the
mounting plate to the wall (use the washers
and nuts as the Fig shows).
3.1.4 Hang the main body onto the upper
end of the mounting plate, and then tighten
the bottom fixing screws
back to the
mounting plate.
B. Installing on the wooden wall: (Note: Make sure the screws are secured in the wood
studs, drill holes on mounting plate to align to the wood studs, and attach an extra
wood frame to the wall if needed.)
3.2.1 Refer to step 3.1.1 and determine the
mounting location, use a stud finder if needed,
and then mount the mounting plate to the wood
studs securely with tapping screws.
3.2.2 Hang the main body onto the upper end
of the mounting plate, and then tie the bottom
fixing screws back to the mounting plate.
Loading ...
Loading ...
Loading ...