Loading ...
Loading ...
Loading ...
7
8. Start a cycle by pressing the button.
Touch the On/Of switch button, the blue light is always on, and the machine will start to run.
The unit’s cycle will run anywhere between 2-7 hours, depending on what is being cycled, and the
volume of the contents.
NOTE:
• When the unit is plugged in the On/Off button will flash on and off once indicating that the composter
has entered STANDBY mode. In STANDBY mode, no LED lights will be illuminated.
• To enter PROCESSING mode, press the On/Off button once. The Drying LED will illuminate, indicating
that the Drying cycle has begun. The On/Off symbol will illuminate when the unit is in PROCESSING mode.
• Removing the lid or pressing the On/Off button during PROCESSING mode is NOT RECOMMENDED.
• If the lid is opened during PROCESSING mode, the existing cycle will be paused and the On/Off button
will flash. Once the lid is closed and locked, the cycle will resume.
• To pause the PROCESSING mode, tap the On/Off button once. Tap the On/Off button again to return to
work.
• To reset the unit, press and hold the On/Off button for 3 seconds.
PROCESSING
ON/OFF
Drying Light
Grinding Light
Cooling Light
Change Filter
Power on/off , pause
The drying cycle can last anywhere from 30-70 minutes. The unit will
automatically switch to the grinding cycle after the drying cycle has completed.
The grinding cycle is the longest cycle mode. The maximum time is 5.5 hours.
Once this cycle is done, the unit will switch automatically to cooling.
The cooling cycle is the last mode in the unit's cycle. The cooling mode lasts
approximately 10 minutes
The change filter light will illuminate when it is time to change your filters. You
must manually reset the Change Filter light after you have installed new filters.
9. Cycle completion
The unit will beep once the cycle is complete.
NOTE:
DO NOT put your hands inside the composter until it has completely finished cycling, has gone through all
cycle modes, and you have unplugged the unit.
Loading ...
Loading ...
Loading ...