Loading ...
Loading ...
Loading ...
17
Configuring Light Warning and Audio Alarm 7.3
This function is available only when the trigger mode is set to Camera Set.
On the OSD menu (Figure 3-7), select Alert. Set Light Warning to ON, and then enter the item.
For Mode, You can select from Lighting to Flash.
If you select Flash, you can set the Flash Frequency to Low, Medium or High.
For Alert Duration, you can adjust from 5 seconds to 60 seconds.
On the Audio Alert item, set it to ON, and then enter the item.
In the Audio item, you can select from three audios.
You can contact after-sales support to customize alarm audios.
In the Volume item, you can select from Low, Medium and High.
In the Alert Duration, you can adjust from 5 seconds to 60 seconds.
Configuring Smart Dual Illuminators Active Deterrence 7.4
Camera
For details on configuring smart dual illuminators, see "5 Smart Dual Illuminators Cameras
Configuration".
Select Main Menu > Alert, and then set Audio Alert to ON. Step 1
Set the Volume and Alert Duration. Step 2
The shortest of alert duration is 5 s, and the longest is 60 s.
Select 5 different audio clips (including Alarm, No parking here, Private land no entry, Step 3
Warning zone keep off, and Welcome).
You can also DIY the first clip to a .bin file and import to the back-end to use.
Loading ...
Loading ...
Loading ...