Loading ...
Audio Functions
Playing a Cassette Tape
1. Adjust the Source Switch switch to Tape.
2. Open the Cassette Door, insert a cassette tape, and close the Cassette Door.
3. Use the cassette controls to play, pause, rewind, and fast forward audio from
the cassette.
4. Turn the Volume dial to turn adjust the volume.
Recording Audio to a Cassette Tape
1. Open the Cassette Door, insert a cassette tape, and close the Cassette Door.
Make sure the tape is not write protected before beginning a recording.
2. Adjust the Source Switch switch to one of the other settings (FM/AM/CD).
3. While playing from the Source, press the Record button. Audio from the
Source will be copied to the tape.
Power
Battery Power
Requires 6 C sized batteries (not included).
AC Power
Plug the power cord into the AC Power Input on the unit
and a standard power outlet.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the
support section at: www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.gpx.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.gpx.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: [email protected]
Copyright © 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
AM/FM Radio
To Improve FM radio reception, adjust the position of the telescopic antenna.
To improve AM radio reception, adjust the position of the unit.
1. Adjust the Source Switch switch to FM or AM.
2. Adjust the Tuning dial to tune the radio to the desired frequency.
3. Turn the Volume dial to turn on the radio and adjust to the desired volume.
6 C batteries
Loading and Playing a CD
1. Lift open the CD door and place a CD in the player, label side facing up.
2. Close the CD door.
3. Slide the Source Switch to CD mode.
4. Press the Play/Pause button to begin playing the loaded disc.
Programming a CD
1. Press the Stop button to stop a loaded CD.
2. Press the Program button. “P01” will blink on the display.
3. Press the Skip Fwd/Rev buttons to select a track.
4. Press the Program button to add the selected track to the program.
5. Repeat steps 4 and 5 to program up to 20 tracks to play in a specied order.
6. Press the Play button to begin the program.
7. Press the Stop button to cancel the program.
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the unit and the
audio output/headphone jack on an audio device.
2. Adjust the Source Switch switch to CD (Aux).
3. Use the controls on the connected device to select and play audio.
Radio TuningVolume Adjust Aux In (3.5mm audio input)Source
Tape/FM/AM/CD (Aux)