Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Nothing will operate
•Is the cooktop wired properly? See the Installation
Instructions for more information.
• Has a household fuse blown, or has a circuit breaker
tripped? Replace the fuse or reset the circuit.
Cooktop will not operate
•Is the cooktop control set correctly? Touch ©N/©FF before
selecting a setting.
•On ceramic glass models, is the "ALL OFF LOCKED"
Cooktop Lockout set? See "ALL ©FF" or "L©CKED"
sections.
Excessive heat around cookware on cooktop
•Is the cookware the proper size? Use ceekware abeut the
same size as the surface cooking area, element or surface
burner. Cookware should not extend more than 1" (2.5 cm)
outside the cooking area.
Cooktop has flashing lights
•Are there lights on the cooktop flashing on and off?
1. Make sure the cooktop controls are OFF.
2. Clean the cooktop touch control panel thoroughly. See
"General Cleaning."
3. If the cooktop lights continue to flash, disconnect power
or unplug the cooktop.
4. After a few seconds, reconnect power or plug in the
cooktop.
5. If the lights continue to blink on and off, call for service.
Cooktop cooking results not what expected
•Is the proper cookware being used? See "Cookware"
section.
•Is the cooktop touch control set to the proper heat level?
See "Cooktop Touch Controls" section.
• Is the appliance level? Level the appliance. See the
Installation Instructions.
11
Loading ...
Loading ...
Loading ...