Pyle PDA5BU Wireless Bluetooth Power Amplifier-200 Watt Audio Stereo Receiver

User Manual - Page 4

For PDA5BU. Also, The document are for others Pyle models: PDA5BU.0

PDF File Manual, 10 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
www.PyleUSA.com
4
www.PyleUSA.com
5
Function
1. Power Button: Press this button to power the unit ON and OFF.
2. Mp3 Control and LCD Screen: All information regarding external media or
this device will be displayed from this screen.
3. SD Card Reader/USB Port: For using external media on this device, just plug
your SD/USB into these ports.
4. FM Search/Tunning: Push it for FM Channel searching.
Rotate it for FM Frequency adjusting.
5. Input Selector: Turn this button to choose the favorable input
6. REMOTE RECEIVER: To receive the signal of remote control
7. Balance: Control the volume balance from left to right.
8. IPOD/MP3 JACK-IPOD/MP3 connects to this jack.
9. Treble Control: Turn this knob to adjust the high frequencies of Channel 1
and Channel 2.
10. MIC 1 or MIC2 Inputs: KARAOKE or EXTERNAL MIC connects to these jacks.
11. Master Volume Control: Turn the this knob to adjust the level of master
volume
12. Bass Control: Turn this knob to adjust the low frequencies of Channel
1 and Channel 2.
13. Microphone Echo Volume Control Knob: Turn this knob to adjust the
microphone echo volume level.
14. Microphone Volume Control Knob: Turn this knob to adjust the volume of
microphone
15. Power LED Indicator: When you turn on the unit, the LED will be on.
16. FM ANTENNA CONNECTOR: Connect for FM antennas.
17. WIRELSS BT ANTENNA: Please pull the antenna out when using Wireless BT
input function
18. POWER VOLTAGE SELECTOR: 110V/220V Switch
19. FUSE: Replaceable Power Fuse
The Amplier uses a fuse for protection against surges and short circuit.
If the Amplier suddenly turns of and will not turn On. Check the fuse and
if necessary replace it with a 1. 5- Amp, 250-Volt, Fast-Acting, 5x20mm Fuse
(Not Supplied).
20. POWER SUPPLY: Connect to AC 110V/60Hz & 220V/50Hz outlet.
21. SPEAKER OUTPUT: Connect your speaker system to these terminals.
22. LINE OUTPUT: Connect the RECORD input jacks to these jacks.
23. AUDIO INPUT: Connect the audio output jacks of Aux 1 or Aux2 to these
jacks.
USB/SD Card & FM Button Control
1. Mode switch button for input choice like USB/SD/BT/FM
2. Play/Pause button
3 & 4. Previous or Next music button doubles as Volume + or Volume -
Short press for Previous or Next music
Press and hold for Volume+ or Volume-
5. RPT button: Repeat music control
6. EQ button control for Hall, Live, Jazz, Rock, Pop, Normal.
NOTE:
The USB input is ONLY mean to connect to a USB ash drive.
Connecting an MP3 player or computer directly to the USB ash drive input will
result in the unit failing to play the audio from those devices.
1 2 3
4
5
6
Loading ...
Loading ...
Loading ...