Loading ...
Loading ...
Loading ...
48
49
BASE INSTALLATION
BASE INSTALLATION
INSTALL CARRIER TO BASE
Check to make sure the Carrier is securely attached to the Base.
3
INSTALL CARRIER TO BASE
3
ALWAYS lift up on Carrier to verify it is properly attached to the Base.
CHECK YOUR WORK
Hold Base at each side and pull side to side and forward. Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or
side-to-side.
Make sure Child Restraint is level by confirming that the bubble on the
level indicator is between the level lines. Make sure infant’s head does
not fall forward. If necessary, re-adjust recline and repeat installation
steps to make sure Child Restraint is installed properly.
Check installation before every use!
Loading ...
Loading ...
Loading ...