Laptop Computer Stand For DJ
PLPTS25
www.PyleUSA.com
NOTE:The Stabilizer Bars MUST be
positioned at least 2 holes apart.
PREPARATION:
Remove the following parts from the box and identify all the parts:
(2) Upper Supports (2) Lower Supports
(2) Stabilizer Rods
(4) Screw Knobs
ASSEMBLING INSTRUCTIONS
1. Start by removing the end caps from
the two stabilizer rods.
2. Assemble the left/right support brackets.
Take one side of the upper supports and
match it with the corresponding side
lower support (the lower supports
feature an anti-slip grip pad on the
bottom) - Figure A.
Align the mounting holes at the desired
height and position the Screw Knobs
through the supports (ensure not to
over-tighten). -Figure B.
3. Repeat steps 1 & 2 above to assemble
the other side of the stand's support
bracket aligning the correct heights
of the stabilizer rods.
Figure A
Figure B
