1
2
3
4
1
2
3
4
10
11
12
13
5
6
7
8
9
5
6
7
8
9
10
11
12
13
WARNING
Ice maker kit should be installed only by an authorized service technician.
To minimize the risk of personal injury, avoid contact with the moving parts of the icemaker
mechanism and with the heating element that releases the cubes.
Do not place fingers or hands on the ice making mechanism while the refrigerator is plugged
in.
WARNING
To
avoid electric shock, which can cause death or severe personal injury, disconnect the
refrigerator from electrical power before connecting a water supply line to the refrigerator.
• Connect the icemaker to potable water supply only.
WARNI
NG
To Avoid Property
Damage:
• Copper tubing is recommended for the water supply line. Water supply tubing made of ¼
inch plastic should not be used since it greatly increases the potential for water leaks. The
manufacturer will not be responsible for any damage if plastic tubing is used for the supply
line.
• DO NOT install water supply tubing in areas where temperatures fall below freezing.
• Chemicals from a malfunctioning water softener can damage the ice maker. If the ice
maker is connected to softened water, ensure that the softener is maintained and working
properly.
WARNING
A newly-in
stalled refrigerator may take 12 to 24 hours to begin making ice.
WARNING
Access to
a household cold water line with water pressure between 30 and 100 psi. (2 and
6.9 bar).
澳Operation outside the water pressure range may cause malfunction and severe,
damaging water leaks.
To minimize the risk of personal injury, avoid contact with the moving parts of the icemaker
mechanism and with the heating element that releases the cubes.
Do not place fingers or hands on the ice making mechanism while the refrigerator is plugged
in.
$XWRPDWLFLFHPDNHULQVWDOODWLRQLQVWUXFWLRQV
14
15
16
17
18
19
20
21
22
23
