Loading ...
Loading ...
Loading ...
42
CARE AND MAINTENANCE
LEVELING THE RANGE
The range must be level to obtain proper operating.
The four screws type leveling legs located on the
corners at the bottom of range should be adjusted
by turning them clockwise to make the range higher
or counter-clockwise to lower the range until the
range is level. Use a level on surface units to
check the leveling of the range.
ANTI-TIP BRACKET INSTALLATION
To reduce the risk of tipping the range by abnormal
usage or improper door loading, the range must
be secured by properly installing the anti-tip device
packed with the appliance.
• Place the anti-tip bracket on the floor as
shown figure. Anti-tip bracket can be installed
on the right and left side.
• Make the locations of 2 (x2) holes of
ant-tip bracket on the floor.
• Use a drill bit
• Secure bracket to floor using screws supplied.
• Slide appliance into position.
Note: If range is relocated, the bracket must be removed and installed in new location.
Anti-tip Bracket
Loading ...
Loading ...
Loading ...