Loading ...
Loading ...
Loading ...
6
Media Converter Installation
Notes:
• The N785-CH12 is compatible with a variety of Tripp Lite N784- and N785-Series media converters. Up to 12 media converters can
be installed in the chassis’s input slots. See Compatible Models for details.
• The below image shows a media converter being installed into the chassis using the included mounting brackets and hardware. The
media converter can be installed into the chassis without the use of the brackets. However, this is not recommended.
1. Using a Phillips screwdriver, remove the screws from the side panels of the media converter.
2. Place the media converter and set of brackets on a flat surface and reinsert the screws with the brackets secured on
each side.
3. After ensuring the rails are flush with the underside of the converter, the converter is ready for loading into the chassis.
Repeat steps 1-3 for additional media converters.
4. Once the brackets have been attached to all desired media converters, they can be inserted into the chassis.
5. Using a Phillips screwdriver, remove the screws from the slot cover panels.
6. Gently insert the media converter into the open slot with the front panel of the converter facing outward.
Note: Always ensure the converter’s power socket at the rear of the unit is positioned at the base of the chassis.
7. Securely fasten the built-in panel screws into place on the chassis port.
Loading ...
Loading ...
Loading ...