Loading ...
Loading ...
Loading ...
Materials Needed
ΒΌ" outer diameter flexible copper tubing
Shut-off valve (requires a '/4" hole to be drilled into
water supply line before valve attachment}
Adjustable wrench
'/4" hex nut driver
Add 8' to tubing length needed to reach water
supply for creation of service loop.
1. Create service loop with copper
tubing (minimum 2' diameteO.
Avoid kinks in the copper tubing
when bending the service loop.
2. Remove plastic cap from water valve
inlet port.
3. Place brass nut (A} and
sleeve (B} on copper
tube end as illustrated.
(Do not use old sleeve.}
A
4. Place end of copper tubing into water
valve inlet port. Shape tubing slightly. Do
not kink - so that tubing feeds straight
into inlet port.
5. Slide brass nut over sleeve and screw nut
into inlet port. Tighten nut with wrench.
IMPORTANT: Do not overtighten. Cross
threading may occur.
6_
Pull on tubing to confirm connection is
secure. Connect tubing to frame with
water tubing clamp (C} and turn on
water supply. Check for leaks and
correct if necessary. Continue to
observe the water supply connection
for two to three hours prior to moving
the refrigerator to its permanent
location.
7. Monitor water connection for 24 hours.
Correct leaks, if necessary.
Handme installation
If not installed, the handle is located in the interior of
the fresh food section or attached to the back of your
refrigerator.
Remove and discard handle packaging and tape.
Handle design varies from refrigerator to refrigeratoL
Please reference the appropriate instructions for your
model below.
Front Mount Handle
MateriaJs Needed
Gloves to protect hands
Phillips screwdriver
Plastic door removal card (or %" thick plastic card},
retain the card
To Install:
The handles are to be oriented
as shown.
AJign front mount door handle
dip with the door tabs.
Ensure the handle dips are
positioned sJightJy above the
door tabs.
3lip
Door
Tab
4. Rotate the handle so that the
handle is fiat against the door.
5, Push the handle down against the
upper door tab just enough to allow
it to hang unsupported.
Loading ...
Loading ...
Loading ...