Loading ...
Loading ...
Loading ...
8
►Cleaningthelters
• Clean the lters using a vacuum cleaner. If you do not have a vacuum
cleaner, tap the lters against a solid object to knock o dirt and dust.
• If the lters are especially dirty, wash them in lukewarm water. Take care
to rinse o any detergent thoroughly and allow the lters to dry completely
before putting them back into the unit.
Caution:
• Donotdrytheltersindirectsunlightorbyusingaheatsource,such
asanelectricheater:thismaywarpthem.
• Donotwashtheltersinhotwater(above122°F[50°C]),asthismay
warpthem.
• Makesurethattheairltersarealwaysinstalled.Operatingtheunit
withoutairlterscancausemalfunction.
Caution:
• Beforeyoustartcleaning,stopoperationandturnOFFthepowersup-
ply.
• Indoorunitsareequippedwithlterstoremovethedustofsucked-in
air.Cleantheltersusingthemethodsshowninthefollowingsketches.
6.CareandCleaning
►Filterremoval
Caution:
• Inremovingthelter,precautionsmustbetakentoprotectyoureyes
fromdust.Also,ifyouhavetoclimbuponastooltodothejob,be
carefulnottofall.
• Whenthelterisremoved,donottouchthemetallicpartsinsidethe
indoorunit,otherwiseinjurymayresult.
■ PEAD-A·AA8
• Whileliftingthelterknob,pullit.
A Air intake B Air outlet C Filter D Knob
5.EmergencyOperationforIRWirelessRemoteController
ON/OFF
HEAT COOL
2
1
1 ON/OFFlamp (lit when unit is operating; unlit when unit is not operating)
2 Emergencyoperation
In cases where the remote control unit does not operate properly, use
either the COOL or HEAT button on the wireless remote control
signal receiver to toggle the unit on or o. On cooler only units, pushing
the HEAT button toggles the fan on and o.
Pressing the COOL or HEAT button selects the following settings.
Operation mode COOL HEAT
Preset temperature 24 °C/75 °F 24 °C/75 °F
Fan speed High High
B
A
D
D
C
4.Timer
■ Timer functions are dierent by each remote controller.
■ Refer to the operation manual that comes with each remote controller for the details included an operation method.
Loading ...
Loading ...
Loading ...