Loading ...
A . B .
C .
Important
Installation
A. Move handle into "OFF" position.
B. Turn on water supplies. Check connections for leaks.
C. Remove and let both hot and cold water run for
one minute. This will help clean any debris that might
otherwise clog the system. Replace aerator.
D. Operate handle up and down, in cold and hot positions,
to flush water lines thoroughly.
aerator
Test Faucet Installation
Simply rinse the surface with clear water or
mild liquid detergents
if necessary Dry the
faucet with a clean soft cotton cloth
Do not
use any cleaning agents containing
acids
polish abrasives or harsh cleaners
Maintenance:
Tighten connection with two wrenches to prevent
damage to tube body. Be careful not to bend the
stem as this will void the product warranty.
Connect to water supply lines with either:
(A) 3/8” O.D. copper tubing (ball nose
risers with the coupling nuts or;
(B) 3/8” copper tubing (no ball) with
supplied tube head interior connector or;
(C) IPS faucet connectors (1/2”).
Remove the nut ( ) that holds the mounting
gasket in place and remove the mounting
gasket and iron ( ).
Tighten the mounting cap ( ), screws ( ) and the
flexible hoses ( ).
Place the base on the deck ( ) and put on the
mounting gasket and iron ( ).
Move the pipe under the deck ( ) and connect
the handle ( ).
Loosen the screws ( ) on the mounting cap of
the handle and remove the mounting cap ( ).
Loosen the handle ( ) and remove the handle
from its base ( ).
While holding the base ( , ), insert the faucet
body in the deck ( ) and reattach the
mounting gasket and iron under the deck with
the nut removed in step 1.
Install the tee junction ( ).
v
w
u
w
u
v
y
x
x
y
U
W
V
W
am
an
ao
ap
aq
ar
X
at
ak
al
am
an
ao
ap
aq
ar
X
at
ak
al
as
as
•
•
•
•
•
•
•
•
ar