Loading ...
Loading ...
Loading ...
33GB8 User Guide
Master Mutes
These four switches (38) will mute any input modules which have been assigned to them.
Talkback/Ocsillator
The OSC 1kHz switch (39) selects the oscillator or the talkback mic input socket as the signal
source. The LED next to the switch indicates when the oscillator is selected.
The talkback mic input is on the rear connector panel.
The level of the talkback mic/oscillator signal is controlled by the TALKBACK/OSC LEVEL pot
(40). The signal is the fed to all groups, aux 1-2, aux 3-4, aux 5-6 and aux 7-8 using the
appropriate buttons (41).
PSU Monitor LEDs
These LEDS (42) confirm the presence of the correct voltage on the +48V and the +/-17V
power rails in the console.
Rear Connector Panel
T/B MIC (3-pin female XLR)
Pin 1 Ground
Pin 2 Signal Hot
Pin 3 Signal Cold
MIX L, R & C OUTPUTS (3-pin male XLRs)
Pin 1 Chassis
Pin 2 Signal Hot
Pin 3 Signal Cold
Loading ...
Loading ...
Loading ...