Loading ...
Loading ...
Loading ...
10.4 INSTALL THE CUTTING LINE
NOTE
Do not put more than 13 feet of cutting line in at a time.
1. Remove the remaining cutting line on the spool.
2. Line up the slots on the spool cap with the slots on the
trimmer head.
Spool
cover
Bump
head
3. Put the cutting line through the hole. Push the cutting line
until it exits the opposite hole.
Hole
4. Pull the cutting line through until there is an equal
quantity of cutting line on each side.
5. Turn the spool cap counterclockwise to wind the cutting
line into the trimmer head. Keep approximately 5 in of
cutting line on each side of the trimmer head.
11 TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before
transportation and storage.
11.1 MOVE THE MACHINE
When you move the machine, you must:
• Stop the machine.
• Remove the battery pack.
11.2 STORE THE MACHINE
• Remove the battery pack from the machine.
• Make sure that children cannot come near the machine.
• Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12 TECHNICAL DATA
Type Cordless, battery powered
Motor 48V (2x24V)
No load speed 6000 / 5300 RPM
Cutting line diameter 0.080" (2.0 mm)
Cutting path diameter 13 in./15 in. (330 cm/381
cm)
Feed Type Bump Feed
Weight (without battery
pack)
7.9 lbs (3.6 kg)
Battery model BAG708 and other BAG
series
Charger model CAG817 and other CAG
series
The recommended ambient temperature range:
11
English
EN
Loading ...
Loading ...
Loading ...