Loading ...
Loading ...
Loading ...
Disconnecting from a Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
30 30
After disconnectionConnected
Unpairing
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30 30
After disconnectionConnected
2.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
Note
●
If you are unable to re-pair the watch
with a phone after unpairing them, use
the procedure below to delete pairing
information from the watch and then
perform the pairing operation again.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (D) for about 10
seconds.
This deletes the pairing information.
The second hand will point to [C].
C
X
Push the crown back in.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
C
Pair the watch with a phone.
Note
●
If your previous phone is near the
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new phone.
If this happens, use the procedure
below to delete the previous pairing
information from the watch. Also,
unregister the watch from the phone
you will no longer connect with.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (D) for about 10
seconds.
This deletes the pairing information.
The second hand will point to [C].
C
X
Push the crown back in.
Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch’s time and day settings when GPS and
time calibration signal reception is not
possible, or communication with a phone is
not possible for some reason.
Setting a Home Time City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
enable or disable summer time.
Note
●
The initial factory default summer time
setting for all cities is “AT (AUTO)”. In
many cases, the “AT (AUTO)” setting
lets you use the watch without
switching between summer time and
standard time.
●
In the cases described below,
receiving GPS position information will
automatically cause “AT (AUTO)” to be
selected for the summer time setting.
ー
When the home city of the current
receive operation is different from
the watch’s home city setting prior to
the receive operation.
ー
When the Home City is unchanged,
but the acquired location information
is for a geographic area with
different summer time rules (start
date, end date)
Operation Guide 5502
14
Loading ...
Loading ...
Loading ...