Loading ...
Loading ...
Loading ...
4K/8K HDR Monitor User Manual
33
5.3 3D LUT File Upload Operating Instructions
Prepare:
Before upgrade, unzip the PD tool package.
1.Connect the computer and monitor with ethernet cable (default IP address is 192.168.1.128).
2.Set Ethernet as fixed IP address at the computer, as shown below, in Internet Protocol Version 4 (TCP/IPv4)
Properties interface choose Use the following IP address, fill the IP address, Subnet mask, Default gateway.
Remark: IP address the 100 can be other values, as long as it does not conflict with 192.168.1.128, but it must on
the same network segment.
3. Double-click "pdtools.exe" to open the interface as follows. If a firewall pops up to prevent the software from
being changed, click "Allow access".
Loading ...
Loading ...
Loading ...