Loading ...
Loading ...
Loading ...
5
The magnetic catch comes as a standard fitting on the laundry tub.
In the interests of child protection against dangerous chemicals and cleaning fluids we recommend a
suitable AS/NZS approved safety latch should be, fitted and used correctly.
Changing the door from right to left
Rotating the Cabinet Door
1. Open the door to its most open position. Unscrew the two screws in the bottom left hand corner. From
inside the unit pull the hinge pin downwards to release the door.
2. Manoeuvre the door to allow removal from the Laundry tub.
3. Unscrew the two screws in the top left hand corner. From inside the unit pull the hinge pin upwards.
4. Insert the hinge pin in the bottom right hand location and secure with two screws.
5. Turn door around. Locate the door on the bottom right pin. Sing the door fully open and insert the hinge
pin in the top right location and push down to locate in the door.
6. Secure with two screws. Check operation of the door.
Troubleshooting – Ensure hinge pin is inserted into pilot hole on the door.
Changing the washing machine inlet from right to left
The washing machine outlet waste hose can be connected to either side of the Robinhood Supertub.
1. On the outside of the laundry tub remove the screws from the white plastic washing machine waste inlet
and the white plastic blanking plate.
2. On the inside of the laundry tub remove the clip from the white plastic washing machine waste inlet and
black flexible hose, move the white plastic part to the other side of the laundry tub
1. Reconnect the washing machine flexible hose to the left hand side replace the clip and ensure good seal.
2. On the outside of the laundry tub secure the white plastic washing machine waste inlet with six screws.
3. On the opposite side of the laundry tub secure the white plastic blanking plate with six screws
Safety Catch (NOT SUPPLIED)
1
2
3
4
5
6
Loading ...
Loading ...