Loading ...
Loading ...
Loading ...
23 Operation
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock,
such as the Kensington lock, to secure the projector. You can locate a Kensington lock slot on
the rear side of the projector. See item 15 on
page 8.
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the
lock’s documentation for finding out how to use it.
Utilizing the password function
Setting a password
1. Go to Advanced Menu - Settings > Security Settings. Press OK. The Security Settings page
appears.
2. Highlight Change Password and press OK.
3. The four arrow keys ( , , , ) respectively
represent 4 digits (1, 2, 3, 4). According to the
password you desire to set, press the arrow keys to
enter six digits for the password.
4. Confirm the new password by re-entering the new
password.
Once the password is set, the OSD menu will
disappear.
5. To activate the Power On Lock function, press /
in the Security Settings page to highlight Power On Lock and press / to select On.
Input the password again.
If you forget the password
If you enter the wrong password, the password error
message will appear, and the Input Password message
follows. If you absolutely do not remember the
password, you can use the password recall procedure.
See
Entering the password recall procedure on page
24
.
If you enter an incorrect password 5 times in succession, the projector will automatically shut
down in a short time.
The OSD screenshots below are for reference only, and may differ from the actual design.
• The digits being input will display as asterisks on-screen. Make a note of your selected password and
keep it in a safe place in advance or right after the password is entered so that it is available to you
should you ever forget it.
• Once a password has been set and the power on lock is activated, the projector cannot be used unless
the correct password is entered every time the projector is started.
Input New Password
Return
Password Error
Please try again.
Loading ...
Loading ...
Loading ...