Loading ...
Loading ...
Loading ...
6According to the guidance displayed on the screen, start the measurement.
If you want to enable an item under “Measuring option”, select the item.
The following screen appears on the TV when the measurement finishes.
After confirming the measurement results, press ENTER.
1
2
3
4
a
The number of speakers (front side/rear side/subwoofer)
b
Speaker distance (nearest/farthest)
c
Adjustment range of speaker output level
d
Warning message (if available)
Speaker indicator with “*” shows the target speaker of a warning message.
7Select “Save” to apply the measurement results to the speaker settings.
8Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
NOTICE
(
The YPAO microphone is sensitive to heat, so should not be placed anywhere it could be exposed to direct sunlight or high
temperatures (such as on top of AV equipment).
NOTE
(
“YPAO Volume” in the “Option” menu is automatically enabled after the YPAO measurement. Then, the high- and low-frequency
levels are automatically adjusted according to the volume so that you can enjoy natural sounds even at low volume.
(
An error message may appear during the measurement.
(
To cancel the operation, disconnect the YPAO microphone before starting the measurement.
(
YPAO multi measurement option cannot be enabled with wireless speakers.
91
PREPARATIONS > Configuring the speaker settings
Loading ...
Loading ...
Loading ...