Remember: Your Use & Care Guide has complete descriptions of all these features and more.
Please read it carefully and keep in a safe place.
When plugging unit in, always press the RESET
button on the Current Device.
QUICK REFERENCE GUIDE
Only install unit according to the supplied Installation Instructions.
To Get Cool
After 250 hours of use the Filter light will illuminate to remind you to clean air
filter. Press Filter button to turn off light.
To Clean the Air Filter
To Enter Timer On or Timer Off
To Compensate for Opening Doors
*Eco
When Eco feature is activated, cooling will turn off once the set temperature is reached. Every
10 minutes fan will run so room temperature can be sensed.
To Run Fan Only
Press Mode to select Fan Only
Fan will circulate air inside the room without air conditioned cooling.
Press Fan Speed button to increase fan speed.
You may also select Auto Fan, which will speed up or slow down fan speeds
automatically based on significant changes in room temperature.
To Go to Sleep
Press the Sleep button
Temperature increases 4°F or 2°C over 1 hour and then holds this elevated
setting for 7 hours.
Press On/Off button. That's it!
The unit is programmed to start in
cool mode, with auto fan speed, Eco
* feature on
To Get Warm
1. Press On/Off button
2. Press Mode to select Heat
3. Press Fan Speed to choose speed (Except
8000BTU model which is low speed only)
and a temperature setting of 72°F.
To Change Temperature unit
Press and hold the up and down buttons together for 3 seconds
to change the display temperature unit between
°F and °C.
and
To delay stop(or start), press the Timer button when the unit is power-on(or
power-off), then the "timer off" indicator(or "timer on" indicator) will illuminate.
Set the delay stop(or start) timer, then the control will count down the time(8,
7.5, 7, etc.) left, and all other settings will remain the same as they were before
the timer setting is confirmed, until stop(or start).
Setting combination of “delay stop delay start” or “delay start
delay stop” is workable. The timer setting can be canceled by either pressing
and holding the timer button for 2 seconds, or pressing the power on/off button
at any time to turn off the unit directly.
turn off turn on
P/N 16120300A23092