Loading ...
Loading ...
Loading ...
34
User Manual AFGR935B
Catalytic Walls *
Catalytic walls are located on the left and the right side of cavity
under the guides. Catalytic walls banish the bad smell and obtain
the best performance from the cooker. Catalytic walls also absorb oil
residue and clean your oven while it’s operating.
Removing the catalytic walls
In order to remove the catalytic walls; the guides must be pulled out.
As soon as the guides are pulled out, the catalytic walls will be
released automatically. The catalytic walls must be changed after 2-3
years.
Rack Positions
It is important to place the wire grill
into the oven properly. Do not allow wire
rack to touch rear wall of the oven. Rack
positions are shown in the next figure.
You may place a deep tray or a standard
tray in the lower and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the
figure, first remove the lower, and than the upper side from
installation location. To install wire racks; reverse the procedure for
removing wire rack.
Changing The Oven Lamp
WARNING: To avoid electric shock, ensure that the appliance circuit
is open before changing the lamp. (having circuit open means power
is off) First disconnect the power of appliance and ensure that
appliance is cold.
Remove the glass protection by turning as indicated in the figure. If
you have difficulty in turning, then using plastic gloves will help you
in turning. Then remove the lamp by turning, install the new lamp
with same specifications.
Reinstall glass protection, plug the power cable of appliance into
electrical socket and complete replacement. Now you can use your
oven.
Rack 4
Rack 3
Rack 2
Rack 1
Loading ...
Loading ...
Loading ...