Loading ...
Loading ...
Loading ...
04 EN EN 05
D. Auto-Clean Station
Dirty water tank
LED indicator
Clean water tank
Water inlet
Cleaning tray
(for cleaning the mopping
pads)
Infrared sensor
(helps RoboVac return
to Auto-Clean Station)
Charging contact pins (x2)
E. Dust Box
Handle
Dust box
High-performance lter
Release button
Pre-lter
Using Your RoboVac
Important Tips Before Use
A
D
B
E
C
F
Remove power cords and small objects from the floor that may
entangle RoboVac.
Fold tasseled edges of rugs underneath to prevent tangling RoboVac.
Avoid cleaning high-pile rugs or rugs thicker than 1.02 in / 26 mm as
they may cause RoboVac to malfunction.
It is strongly recommended to place physical barriers or set a “No-Go”
zone via the eufy Clean app in front of fireplaces and certain areas (i.e.
air vents) that may cause damage to RoboVac if entered.
Avoid vacuuming large amounts of water as it will potentially damage
the device.
RoboVac may climb on top of objects less than 0.79 in / 20 mm in
height. Remove these objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling down stairs
and steep drops in most cases. Sensors are less effective if dirty or
used on carpeted / reflective floors. Place physical barriers or set a
“No-Go” zone to block off areas where RoboVac may fall.
LED Indication
You can see the status of RoboVac from the LED indicators.
LED Indicators LED Indication RoboVac Status
Pulsing blue Turned on
Steady blue Start / pause / resume
Steady blue Spot cleaning
Steady blue
Returning to Auto-Clean
Station
Pulsing blue Charging
Steady blue Standby / pause
Flashing red quickly
Error
(Please refer to voice
alerts or the in-app
instructions for solutions)
Loading ...
Loading ...
Loading ...