Loading ...
Loading ...
Loading ...
9
Allow to stand for a minimum of 3 hours before plugging in to the mains
The temperature in the appliance is controlled by the temperature control knob
located inside the fridge. Rotate the control knob left or right to regulate the
temperature inside the fridge.
On the temperature control, 0 is OFF, 1 is the warmest setting and 5 is the
coldest setting. Under normal conditions the temperature control should be set
at setting 2 or 3 in the Summer (high ambient temperature)/normal conditions
(low ambient temperature) and setting 1 or 2 in the Winter. Setting 5 should be
used as a rapid cool setting and should only be set 2 hours before a large amount
of food is placed in the fridge. The temperature control should be put back to
setting 1 - 3 (dependent on the ambient temperature) after the food has been
placed in the fridge, if this is not done the temperature in the fridge
compartment could fall below 0ºC as the compressor will run continuously.
Once the temperature control has been set, close the door and plug in the
appliance. We recommend that the door is not opened for a minimum of 4
hours to allow the appliance to reach the standard operating temperature.
Note: The standard operating temperature for the fridge compartment should be
between 0ºC and 4ºC.
• Note: The temperature of the freshly stored food and how often the door
is opened affects the temperature in the refrigerator compartment. If
required, change the temperature setting.
Usage
Temperature Selection
Summer Normal Winter
Set on 2 - 3 Set on 2 - 3 Set on 1 - 2
Loading ...
Loading ...
Loading ...