Loading ...
Loading ...
Loading ...
5
OPERATING INSTRUCTIONS
Option Selections (*available on
select Models)
*Sanitize Option
To sanitize your dishes and glassware, select
SANITIZE option. When selected, the light
above the pad will come on and reamin on until
end of cycle. The water temperature in the
fi nal rinse will be raised to 155
o
F (68
o
C) and
will maintain that temperature for 9 minutes.
This option is available in Heavy and Normal
Cycles. Only these sanitization cycles have ben
designed to meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached.
Washing
action will continue during the water heating
delay. For best results, the incoming water
temperature should be at least 120
o
F (49
o
C).
The sanitize criteria may not be satisfi ed if there
is an interruption of the cycle, power failure or if
the incoming water temperature is below 120
o
F
(49
o
C).
To turn off the SANITIZE option, press the pad
a second time. The light above the pad will
turn off.
*Hi-Temp Wash Option
When HI-TEMP WASH option is selected, the
dishwasher heats water in the main wash to
approximately 140
o
F (60
o
C).
This increase in water temperature helps the
dishwasher detergent remove food grease and
soil from dishes more effectively and aids in
improved drying performance. HI-TEMP WASH
option can be used with all cycles except RINSE
ONLY. HI-TEMP WASH is automatically provided
when the HEAVY WASH cycle is selected.
When HI-TEMP WASH option is selected, the
light above the pad will come on and remian
on until end of cycle. To turn off the HI-TEMP
WASH option, press the pad a second time.
The light above the pad will turn off.
*Delay Start
The DELAY START option allows you to
automatically delay starting your dishwasher
for either 2-4-6 hours.
To activate delay start option for 2-4-6 hour
delay, press the pad once for a 2 hour delay,
twice for 4 hours and three times for 6 hours.
A light will come on indicating the delay start
hours and will remain on until cycle starts.
To cancel the DELAY START option and begin
the cycle before the delay period is over, press
the START/CANCEL pad.
Heat Dry
The HEAT DRY option in combinaion with rinse
aid will enhance drying performance. The
energy required to use the HEAT DRY option
costs pennies per cycle; however you will
have items in your dish load that will not be
completely dry at the end of the cycle.
Child Lock Controls
To prevent children from accidently changing
the dishwasher cycle or starting the
dishwasher, lock the dishwasher controls by
pressing and releasing the RINSE ONLY pad
(some models) or the NO HEAT DRY pad
(some models) for 3 seconds while the door
is latched. An indicator light on the lock
graphic pad will illuminate when the controls
are locked and no new selections can be
made until the lock is released. To unlock the
controls, press the same pad, RINSE ONLY or
NO HEAT DRY, again for 2 seconds until the
indicator light goes out.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle.
Press START/CANCEL pad and the dishwasher
will start a 90 second drain. At the end of the
drain, select the next desired cycle.
*Status Indicator Lights
The WASHING light comes on at the beginning
of the cycle and remains on until the end of
the main wash.
Whether heated or unheated dry is selected
the DRYING light will come on during the
drying portion of the cycle.
When the SANITIZE option is selected, the
SANITIZED light will glow when the SANITIZE
cycle is fi nished. If the dishwasher did not
properly sanitize the dishes, the light will not
come on. This can happen if the cycle is
interrupted. The light will remain on until the
door is opened.
The CLEAN light will come on at the end of
cycle and remain on until the door is opened.
Loading ...
Loading ...
Loading ...