Loading ...
Loading ...
Loading ...
Adding Detergent and
Rinse Agent (ooot oue¢
FHling the Detergent Dispenser
(Raised Position)
1. Open the dishwasher door approximately
halfway to a 45 ° angle.
NOTE: The detergent dispenser cover must
be open for the detergent dispenser to be
placed in the raised position.
2. Press the Figure 25
blue
button
on the
right
side of the
dispenser
as shown
in Figure
25. The
dispenser
cover and cup will swing upward to the
raised position.
3. Fill the detergent cup as recommended in
Table 1.
4. Slide the cover as shown in Rgure 26, arrow
1, and
press
down
firmly as
shown in
Figure 26,
arrow 2
so that
the cover
snaps
shut.
Filling the Rinse Agent Dispenser
(Raised Position)
1. Open the dishwasher door approximately
halfway to a 45 ° angle.
2. Open the rinse agent dispenser cover.
3. Pull the filling trough upward so that it
snaps into Figure 27
the raised
position
as indicated
by the arrow
in Figure
27.
Care and Maintenance
Maintenance Tasks
Certain areas of your dishwasher require
occasional maintenance. The maintenance tasks
are easy to perform and wifl ensure continued
superior performance from your dishwasher.
Wiping Up Spills and Splash-out
NOTE: Standing water around or under the
dishwasher can cause mold growth. Do not allow
water from spills and splashout to remain around
or under your dishwasher.
Water may occasionally splash out of your
dishwasher, especially if you interrupt a cycle or
open the dishwasher door during a cycle.
immediately wipe up any water that spills or
splashes out.
Your Dishwasher
POSSIBLE DISHWASHER DAMAGE:
Freezing temperatures can damage your
dishwasher. Do not allow water to remain in
your dishwasher water suppJy or drain
systems through extended periods of
freezing temperatures.
Jfyour dishwasher will not be used for an
extended period of time in a location that
experiences freezing temperatures (e.g., in a
holiday home or through a vacation period), you
must drain all the water from the dishwasher
interior.
15
Loading ...
Loading ...
Loading ...