Loading ...
Loading ...
Loading ...
14 | English
Grass trimmerEasyGrassCut 23EasyGrassCut 26
Protection class
/ II / II
Serial numbersee type plate on garden tools
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
3 600 HC1 H..3 600 HC1 J..
Noise emission values determined according to EN 62841-4-4.
Typically the A-weighted noise levels of the product are:
–Sound pressure leveldB(A)
7880
–Uncertainty KdB
= 2.5= 2.5
–Sound power leveldB(A)
9091
–Uncertainty KdB
= 2.0= 1.0
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-4-4
–Vibration emission value a
h
m/s
2
< 2.5< 2.5
–Uncertainty Km/s
2
= 1.5= 1.5
Mounting and Operation
ActionFigurePage
Product features
A
214
Delivery scope
B
215
Removing the transport safety
C
215
Connecting the shaft
D
216
Adjusting the Handle
E
216
Mounting the protection guard
F
217
Connecting the extension cable
Switching On and Off
G
218
Removing the line spool
H
218
Winding line on spool
I
219
Mounting the line spool
J
219
Line feeding
K
220
Maintenance, Cleaning and Stor-
age
L
220
Accessories
M
221
Assembly
u Caution: Switch the garden tool off and pull the mains
plug before performing any maintenance.
Connect shaft (see figures C and D)
Note: A connected shaft can no longer be dismounted.
Remove the transport safety (7).
Connect the individual parts of the shaft until they can be
heard to engage.
Mounting and adjusting the handle (see figure E)
The handle (1) can be set to different positions. To change
the adjustment, press buttons (5) and move the handle to
the desired position. Release the buttons (5) again so that
the handle can engage.
Mounting the protection guard (see figure F)
Before mounting the protective guard, pull the plant-protec-
tion frame from the delivery position to the storage position.
Position the protection guard (6) on the trimmer head and
fasten it with the provided screw.
Do not disassemble guard once connected.
Then, pull the plant-protection frame to the working posi-
tion.
Operation
u Pay attention to the mains voltage. The voltage of the
power source must match the voltage specified on the
rating plate of the machine.
u Caution: Switch the garden tool off and pull the mains
plug before adjusting or cleaning.
u The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
u Do not briefly switch off and on again several times in
a row.
u Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Switching On and Off (see figure G)
To switch on, firstly press the lock-off button (2). Then
press the On/Off switch (3) and keep it pressed.
To switch off, release the On/Off switch (3).
F 016 L94 451 | (12.05.2022)Bosch Power Tools
Loading ...
Loading ...
Loading ...