Loading ...
Loading ...
Loading ...
10
Prior to setting up, please check that the transmitter and receiver are tuned to the same frequency or channel. Two or more transmitters
operating in the same frequency can not be used at the same time and same area.
Connect the provided DC power supply to the receiver with an appropriate AC
power source. The receiver is on when the LCD screen display lights up.
Using a standard audio cable with 3-pin XLR connectors or 1/4” phono cable to
connect the mixer or amplifier
Never use the balanced and unbalanced audio outputs at the same time. This may
cause signal loss or increased noise
Set the audio output level for
MIC: -20dB
LINE: 0dB (Default setting)
Using the Volume Knob to adjust the AF audio level to the input of the
amplifier or mixer.
Use the SQ (squelch) to avoid reproducing noise when the receiver does not receive
enough signal from the transmitter.
Turn clockwise to increase squelch and reduce noise. When turning the squelch
knob clockwise, it begins to eliminate background noise.
When squelch is all the way to the left, the squelch is off and the ambient RF noise
will be easily heard.
Default settings: In minimum SQ position.
Minimum SQ
Maximum SQ
Default settings: In minimum VOLUME position.
Balanced XLR Cable
Unbalanced 1/4” Phono Cable
VOLUME
SYSTEM OPERATION
Loading ...
Loading ...
Loading ...