Loading ...
Loading ...
Loading ...
Insert the other end to the
air valve and twist clockwise.
1
2
Screw the pump hose
onto the INFLATE port.
1
2
07 08
Installing the FinInflating the SUP Board
Unroll the paddle board on level
ground with the air valve facing up.
1. 2. 3.
Remove the valve cap and
ensure the pin is in the Up position.
4. 5. 6.
Pump the board with steady strokes
until the pressure gauge reads 10-12psi.
Screw on the cap.
(It is normal that you will hear a small
burst of air when removing the hose.)
IMPORTANT
DO NOT
exceed 15 psi.
Flip the
board upside down.
1. 2. 3. 4.
Make sure the fin is secured before paddling.
Remove the
anti-deformation gasket.
Slide the fin into
the notched section.
Lock the fin by
inserting the clip into the hole.
Assembling the Paddle
Connect the two paddle
shafts until they click into place.
1. 2. 3.
Open the quick-lock,
adjust to desired height.
Lock into place by
pressing the quick-lock.
1
6
5
6
6
1
2
1
65
66
Loading ...
Loading ...
Loading ...