Loading ...
Loading ...
2
OPERATION
1. Before inserting the plug into an electrical outlet, make sure that the
electrical supply in your area matches that on the rating label on the unit.
2. When plugged in, turn on the Main power switch at the back of the unit.
3. When in Standby mode, only the switch on the control pa nel will
respond to your touch, and the LED display shows the room temperature.
Press to access the rest of the control panel or remote control
a) Low Power: 750W (Press “POWER” to switch it)
b) High Power: 1500W (Press “POWER “to switch it)
c) TIMER: Press”TIMER”button repeatedly to set a period after which
the heater will turn itself off (From 0 hour – 8 hours)
d) + , - : adjust room temperat ure .Temperature setting from 50-95
degree. “+” to increase the desired temperature and “-“ to decrease
the desired temperature. (On Remote control only)
e) Osc : Press “OSC. “to activate oscillation. Press it again to cancel.
f) Press . to turn off the he ater, the unit will keep working 30
seconds of cool air after turn off it . this design can protect item use
longer.
Loading ...