Loading ...
Loading ...
Loading ...
9
Metal Cutting
When cutting metallic material with this tool, be sure to use a sharp blade designed for this purpose. We
recommend lubricating the cutting surface with cutting oil to avoid heat buildup. Follow general cutting
procedure on previous page. Do not force tool. Use only enough pressure to keep the saw cutting.
MAINTENANCE
• WARNING. Do not allow brake-fluids, gasoline, petroleum-based products penetrating
oils, etc. Come in contact with plastic parts. They contain chemicals that can damage,
weaken or destroy the housing, thus compromising the integrity of the double insulation.
•Inspecting the mounting screws.
Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the
screws be loose, tighten them immediately. Failure to do so could result in serious injuries.
•Maintenance of the motor.
The motor unit winding is the very “heart “ of the power tool. Exercise due care to ensure the winding
does not become damaged and/or wet with oil or water.
•Inspection the carbon brushes
The motor employs carbon brushes which are consumable parts. Since an excessively worn carbon brush
could result in motor trouble, replace the carbon brush with an identical part when it becomes worn to or
near the limit. In addition, always keep carbon brushes clean and ensure that they slide freely with in the
brush holder
WARNING: A set of spare carton brush is included in this package for replacement
purposes. The check and replacement of the brushes should only be performed by a
qualified service technician using identical parts to ensure the integrity of double insulation.
To assure the safety of our customers, we strongly recommend against the consumers checking and
changing the brushes.
NOTE: Under normal usage, the carbon brushes will last beyond the 90 day warranty period. Therefore,
do not open the body housing within 90 days of purchase to inspect the brushes or the manufacturer
warranty will void at that time, please see warranty section if a return is necessary.
NOTE: Please read “WARNING” or previous section regarding checking and changing of the carbon
brushes.
Loading ...
Loading ...
Loading ...