Loading ...
Loading ...
Loading ...
2625
OVEN FUNCTION SELECTORS - RG/RGB/RGS MODELS
The timer must be set to “ON” or a timed option with the temperature dial set to the
preferred temperature for the oven to function.
The timer stops when going from OFF to ON. Turn the dial counterclockwise to go to
the ON position and turn it clockwise to go to a timed position.
Broil: This setting uses only the top heating element.
Max: Highest heat setting. Use for roasting and baking breads and pizzas.
To activate the convection fans, push the convection fan toggle on the right side of
the control panel. It will be a switch or a button. The convection fan will only run on
regular temperature settings and will not run while “BROIL” is selected.
OFF
30
OG
60
90
12 0
15 0
18 0
OFF
250
HJKMP
300
QRT
350
400 450
500
UV n
OPERATIONOPERATION
Be sure to set all worktop/oven/broiler burner controls to the OFF position after each
use of the appliance.
Maximum temperature setting/recommended control knob position for burner
ignition.
The regulating knobs should be turned in anti-clockwise direction until the small flame
symbol, vice-versa for the larger flame symbol. To light up the burner, keep pushing
the knob and turn it anti-clockwise to maximum, and hold it for 3 to 5 seconds.
The ignition will spark and ignite the burner. At this position, the gas supply is at
the maximum and the flame also at its maximum. You can reduce the flame size by
turning the knob in anti-clockwise direction. Should the burner fail to light up, turn the
knob to its original position and try again. Your burner flame should be blue in color.
NOTE: When igniting a burner, all burners will spark, but only the burner’s knob you
are using will ignite the flame.
NOTE: When first used, the gas burner will not ignite immediately. Time is required for
the gas to fully fill the operating system.
NOTE: System cooling fan will run on all oven settings when it is in use.
OFF
Maximum Flame Height
Minimum Flame Height
Cooktop Cooking
Using the Oven
The flame color should always be blue. Flickers of orange and yellow
are acceptable. If flames appear orange or yellow and stay that
way, check the surrounding area. Candles, cleaning products, and
other changes in atmosphere can affect the flame color.
WARNING
Loading ...
Loading ...
Loading ...