Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
4. Remove one of the four tter plate screws (P) located
on the underside of the motor assembly (G) and loosen
the other three screws. Align the screw holes of the
light pan (H) with the loosened tter plate screws (P)
and turn in a clockwise direction. Replace previously
removed tter plate screw (P), then tighten all screws.
5. Remove one of the three light pan screws (I) from the
light pan (H) and loosen the other two screws. Connect
the single-pin connectors from the motor assembly (G)
to the single-pin connectors from the light kit (O) -- Blue
to Blue and White to White. Align the two key slots in the
light kit (O) with the two previously loosened light pan
screws (I). Place the light kit (O) over the two screws and
turn the light kit (O) clockwise. Re-install the previously
removed light pan screw (I), and tighten all three screws
securely.
6. Install the bulbs (M) into the sockets of the light kit (O).
Important: Make sure you allow the bulbs (M) and light
kit (O) to cool before you replace the bulbs.
6
5
M
H
I
O
P
N
H
Single-pin
Connector
4
O
Loading ...
Loading ...
Loading ...