Loading ...
Loading ...
Loading ...
In-Dash
tm
THREE.2
Owner’s Enjoyment Manual
9
Figure 4: Rear View of the THREE.2
B. THREE.2 Power Wiring
• • ENLIGHTENING INFO Disconnect the negative
terminal of your car’s battery before working on any electri-
cal connections. Failure to do so could lead to a dramatic
spark in your life.
Remote Turn-On: Connect a 22 to 18 gauge wire from
the head-unit’s remote turn-on to the “Remote” connector on
the THREE.2.
Positive(+12V) Connection: Insert an 18 gauge or
larger wire into the connector labeled “Power” on the nifty
connector of your THREE.2. Connect it to a good, constant
fused source of 12 volts (we suggest the battery).
Ground Connection: Use the same gauge wire as you
did for the positive connector and run it from the “Ground”
connector on the THREE.2 to the negative terminal of the
battery, a ground buss, or a verified ground location. The fac-
tory head unit ground is not recommended.
Illumination: The connector labeled “Illumination”
on your THREE.2 provides power to the backlighting of your
unit. Connecting it to a switched 12 volt source, such as the
“Remote” will light up the backlighting of your THREE.2.
A really cool idea is to connect the illumination wire to a
factory dash light dimmer and have the ability to dim the
backlighting of the THREE.2 with your dash lights.
Power
Remote
Ground
Illumination
Power Connector
Aux In
Loading ...
Loading ...
Loading ...