Loading ...
Loading ...
Loading ...
ENGLISH
3
batteries may exhibit unpredictable behavior resulting
in fire, explosion or risk ofinjury.
d ) Do not expose a battery pack or appliance
to fire or excessive temperature. Exposure to
fire or temperature above 266°F (130°C) may
causeexplosion.
e ) Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product
ismaintained.
f ) Only for use with chargers HHVK320J:
S010QU1400040/SSC-140040US, HHVK515J:
S010QU2300040/SSC-230040US.
SAVE THESE
INSTRUCTIONS
SYMBOLS
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ..............................volts
A .................................. amperes
Hz ................................hertz
W .................................watts
min .............................minutes
or AC ................ alternating current
or DC .......... direct current
n
o ............................... no load speed
..............................Class I Construction
(grounded)
...............................earthing terminal
.............................safety alert symbol
.............................. Class II Construction
(double insulated)
.../min or rpm. revolutions or reciprocation
per minute
Wh ..............................Watt Hours
ASSEMBLY
WARNING: Do not attempt to modify or
repair theappliance.
Intended use
Your BLACK+DECKER lithium ion cordless vacuum cleaner
has been designed for light, dry vacuum cleaning purposes.
This appliance is intended for household useonly.
Charging the battery
WARNING: For use only with the supplied
charger.
WARNING: Before charging, be sure to
empty all contents and dry thoroughly if needed to
avoid damage to your appliance.
1. Before first use, the battery must be charged for at least
5 hours.
2. Make sure the appliance is switched off.
3. Fig. B - Plug the jack plug
9
of the jack plug charger
8
into the charging port
7
of the vacuum.
4. Plug the charger into any standard 120 Volt 60 Hz
electricaloutlet.
Fig. B
9
8
7
NOTE: While charging, the charger may become warm. This
is normal and does not indicate a problem. The appliance
can be left connected to the charger indefinitely.
WARNING: Do not charge the battery
at ambient temperatures below 39°F (4°C) or above
104 °F (40°C).
Charging Indicator LED
1. While charging, the white LEDs on the charger
8
will
flash and increase in sections.
2. When charging is completed, the white LEDs will turn
off.
Switching On (Fig. C)
1. To switch the appliance ON, press the On/Off switch
1
.
2. Press the On/Off switch
1
again to engage boost mode.
3. Press the On/Off switch
1
switch to turn the vacuum Off.
Fig. C
1
State of charge indicator
This appliance include a state of charge indicator
2
which
consists of three white LED lights
10
that indicate the
level of charge remaining in the battery. This feature is only
activated when the vacuum is poweredon.
Loading ...
Loading ...
Loading ...