Loading ...
Loading ...
Loading ...
11
3. Use the included socket wrench to remove the blade gear
from the blade bolt. At this point, the blade bolt, cutting
blade and rack should come off the pruner (Figs. 23
-
24).
Fig. 22
Nut
Hex key
Fig. 23
Blade
gear
Socket
wrench
Fig. 24
Blade
gear
Cutting bladeRack
Blade bolt
Pinion
4. Fit the new cutting blade and the rack on the pruner. Then,
reinstall the blade bolt and blade gear to secure them in
place (Fig. 24).
NOTE: When reinstalling the rack, make sure the gear
teeth are in contact with the pinion.
5. Reattach the blade cover and the two screws.
Storage
• Store the tool in a secure and dry location. The storage
temperature must always remain between 41°F (5°C) to
104°F (40°C).
• Remove the battery from the compartment.
• Clean the product as described above.
• Fit the blade sheath over the blades (Fig. 25).
• Fully recharge the battery before using the tool after
prolonged storage.
Disposal
• Do not dispose of electrical tools as unsorted municipal
waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical tools are disposed of in landfills or dumps,
hazardous substances can leak into the groundwater and
get into the food chain, damaging your and others’ health
and wellbeing.
Recycling + Disposal
The product comes in a package that protects it against
damage during shipping. Keep the package until you are
sure that all parts have been delivered and the product is
functioning properly. Recycle the package afterwards or keep
it for long-term storage.
WEEE symbol. Waste electrical products should not
be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority
or local store for recycling regulations.
Fig. 25
Blade sheath
Loading ...
Loading ...
Loading ...