Loading ...
Loading ...
Loading ...
41
Technical Details
IMAGE IS BLURRED
Possible Causes Solution
The Projector is not in focus. Adjust the focus with the focus adjustment but-
tons on the remote control until the image comes
into focus, or use the focus adjustment buttons on
the side of the projector
The Projector is oset from plane / angle of opera-
tion.
Move the projector so that it is both 180 degrees
and on an evern plane with the screen or adjust
the keystone through the remote, keypad or Set-
tings Menu
NO SYNC, NO SIGNAL
Troubleshooting
Be sure to setup the computer to enable a video signal output. On some laptops this is
done by pressing and holding Function F5 key. If using the P8 as an external monitor on
Windows based systems, this can be done by selecting “extend my desktop to this moni-
tor”. Depending on the video driver dierent resolutions may need to be selected for proper
output.
Loading ...
Loading ...
Loading ...