AYCLIF XQB201A-GOLD6 Full Automatic Washing Machine, 17.7lbs Top Load Portable Washer With Drain Pump,10 Wash Programs 8 Water Levels, For Dorm Apartment Rv Full-automatic Washing

Instruction Manual - Page 16

For XQB201A-GOLD6. Also, The document are for others AYCLIF models: XQB201 -GOLD6, XQB201 -GREY6

PDF File Manual, 16 pages, Read Online | Download pdf file

XQB201A-GOLD6 photo
Loading ...
Loading ...
Loading ...
Error Digital Display
Information
Error Reason How to fix
E1 – Water Inlet Fault
E2 – Drainage Fault
E3- Top Cover Fault
E4 – Spin Fault
E6 – Water Level Fault
E5 – Water recycle
reminder
Remarks
E7 – Child Protection
Incoming water has taken over 20 minutes to
reach water level.
The Inlet Valve is blocked or obstructed.
The Water supply is cut off or the stopcock is
open.
Check the reason for low water pressure, open
and close the cover 1 time to restart operation.
Remove the blockage from the inlet valve,
once done open and close the cover 1 time to
restart operation.
Turn on the water supply or stopcock , once
done open and close the cover 1 time to
restart operation.
Reposition the drain pipe for a more
smooth water drainage, once done open
and close the cover 1 time to restart
operation.
Remove the blockage from the drain
valve, once done open and close the
cover 1 time to restart operation.
Reposition the clothes in the tub so they
are balanced and level and close the
cover.
Place the washing machine on a level
surface, once done please open and
Place the drain pipe in the water tank,
then open nad close the top cover or
press the "Start/Pause" key to drain the
water.
close the cover.
Unplug the machine, wait 10 seconds
and replug the machine. If issue
continues set water level to normal and
restart the machine.
Ensure that your child is a safe distance
from the machine and close the cover.
If unsolved the problem after use above methods, please contact maintenance dept and processional
maintenance personnel, customer can not assemble or disassemble.
Close the cover.
Water drainage has taken over 5 minutes.
Drain valve blocked, damaged or faulty.
Drain pipe is damaged.
The cover is open during use.
The wahser is going to drain the water,now
you can place the drain pipe in the water tank
to collect the gray/waste water.
Clothes are not level or balanced.
The machine is standing at an incline.
Water level sensor fault.
Water Leakage.
Harness contact is loose.
Airway tube is loose.
Machine is Child locked but the cover has been
opened.