Loading ...
Loading ...
Loading ...
2 General appliance description
2.5 Operating the appliance
The operating panel must be kept clean and dry. Wash and dry your hands. The
buttons will otherwise not react or can come on accidentally.
Touch the button to switch the drawer on.
Touch or repeatedly to set the required temperature and duration or one of the
four preset operating modes with adjustable temperature and duration settings.
Close the drawer.
Operation starts; the pilot lamp illuminates if the drawer is closed.
Opening the drawer interrupts operation.
The pilot lamp flashes if the drawer is open.
Close the drawer to continue the programme.
When the set duration is up, an acoustic signal is emitted.
The button is dimmed in the standby mode.
After operation ends or the button is touched, the interior illumination of the
warming drawer goes out automatically after 5minutes. The interior illumination is
activated again by touching the button or by closing and opening the warming
drawer.
Switch the appliance off before time if necessary: hold the button depressed for 1
second.
The function is activated when the button is released.
The button is dimmed in the standby mode.
The display for temperature, duration (if any) and/or programme go out.
Do not leave the warming drawer unattended for longer periods of time when us-
ing continuous operation. Keeping food warm overly long can dry it out and even
cause it to catch fire.
Your warming drawer is equipped with a safety shut-off that switches the drawer to
the standby mode after a maximum of 12 hours of continuous operation.
2.6 Delayed start
The delayed start is activated when both an operating time and a delayed start duration
have been set for the operating mode selected.
The appliance switches on when the delayed start is up and switches off again when the
operating time finishes.
Before setting the delayed start
Place the dishes or food in the warming drawer.
Select the desired operating mode.
Set the temperature and duration.
11
Loading ...
Loading ...
Loading ...