Loading ...
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Mix Colours 59’
To wash mixed and coloured items together.
Synthetics 59’
Suitable for washing moderately soiled garments made of synthetic bres
(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.
Cotton 45’
short cycle designed to wash delicate cotton items.
Wash&Dry 90’
The cycle guarantees the washing and drying performances for a 2 kg
load in 90 minutes (level “A1” Iron dry); for larger loads, the cycle’s
duration increases in order to guarantee the cycle performances.
Wash&Dry 45’
Select programme 5 for washing and drying lightly soiled garments
(Cotton and Synthetic) in a short time. This cycle may be used to wash
and dry a laundry load of up to 1 kg in just 45 minutes (level “A1” Iron
dry). To achieve optimum results, use liquid detergent and pre-treat cus,
collars and stains.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics
Specic for synthetic items. If the dirt is dicult to remove, the temperature
can be increased up to 60° and powder detergent can be used too.
Wool
All wool garments can be washed using programme 8, even those
carrying the “hand-wash only” label. For best results, use special
detergents and do not exceed 2 kg of laundry.
Eco 40-60
For washing normally soiled cotton garments declared to be washable at 40 °C
or 60 °C, together in the same cycle. This is the standard cotton programme
and the most ecient in terms of water and energy consumption.
! The cycle runs only at 40°C as per regulation.
20°C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
White
For heavily soiled whites and resistant colours.
Cotton Dry
Designed for drying cotton fabrics.
Synthetics Dry
Designed for drying Synthetics fabrics.
Rinse
Designed for rinsing and spinning.
Spin
Designed to spin and drain the water.
Drain
Designed for draining the water.
DISPLAY
The display is useful when programming the machine and provides a
great deal of information.
B
CA
The duration of the available programmes and the remaining time of a
running cycle appear in section A; if the DELAY TIMER option has been
set, the countdown to the start of the selected programme will appear.
Furthermore, pressing the corresponding button allows you to view the
maximum temperature, spin speed and drying level or time values
attained by the machine during the selected cycle.
The phases scheduled for the selected cycle and, once the cycle has
begun, the current phase of the wash cycle (and drying cycle, if
applicable) appear in section B.
Wash
Rinse
Spin / Drain
Drying
The icons corresponding to “temperature” , “Drying” and “spin”
appear in section C from top to bottom:
If the symbol lights up, the display will visualise the set “temperature”
value.
The symbol lights up while the drying settings are being adjusted.
If the symbol lights up, the display will visualise the set “spin” value.
DOOR LOCKED INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door .
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened .
FIRSTTIME USE
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the “Auto
Clean” cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button ; the START/PAUSE indicator light will
ash slowly green.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the Wash Cycle Table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments as described in “DETERGENT DISPENSER DRAWER”
section.
- Close the door.
- Select the desired wash cycle.
- Set the washing temperature.
- Set the drying cycle if necessary.
- Select the desired options.
STARTING CYCLE
Press the START/PAUSE button.
The machine will lock the door ( symbol on) and the drum will start to
rotate; the door will be unlocked ( symbol o) and then locked again
( symbol on) as preparation phase of each washing cycle. The “Clicking”
noise is part of the door locking mechanism. Water will enter the drum
and start the washing phase once the door is locked.
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash amber. If the symbol is not lit, the door may be
opened . To start the wash cycle from the point at which it was
interrupted, press the START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle; the
indicator light will ash amber. If the symbol is not lit, the door may be
opened . Press the START/PAUSE button again to continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washer-dryer
using the START/PAUSE button (the relative indicator light will ash
amber), then select the desired cycle and press the START/PAUSE
button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
END OF THE CYCLE
Once the cycle terminates the END indicator light will light up; when the
symbol switches o, the door may be opened . Open the door, unload the
laundry and switch o the machine. If you do not press ON/OFF button,
the washer-dryer will switch o automatically after about a 10 minutes. .
Close the water tap, open the door and unload the washer-dryer. Leave the
door ajar to allow the drum to dry.
OPTIONS
- If the selected option is not compatible with the programmed wash
cycle, the indicator light will ash and the option will not be activated.
- If the selected option is not compatible with another option which
has been selected previously, the indicator light corresponding to the
rst option selected will ash and only the second option will be
activated; the indicator light corresponding to the enabled option will
remain lit.
Extra Wash
Enable the
Extra Wash
option for very dirty items, where compatible.
Press this option to let the cycle automatically re-adjust all wash
parameters through a longer lasting cycle. The option always leaves the
temperature unchanged, while the spin cycle is automatically brought
back to maximum levels. The user can set the spin cycle back to the
desired value at any time.
Loading ...
Loading ...