Loading ...
2 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)
CAUTION
• Warranty does not cover exterior or outside installations.
• Moving parts. Do not operate with front cover removed.
• Hot parts. Do not operate with cover removed.
• To reduce risk of shock, disconnect power before servicing.
• Drain line must not be vented.
• Water supply must have particle ltration.
• Most ice machine cleaners contain citric or phosphoric acid, which can cause skin irritation. Read caution label
on product and follow instructions carefully.
• Ice is slippery. Maintain counters and oors around dispenser in a clean and ice-free condition.
• Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
Specications
Electrical
Separate circuit and equipment ground required.
Evaporator unit
Standard electrical: 115/60/1
Maximum fuse: 15A
Amperage: 5A
Condensing unit
Electrical
Min Circuit
Ampacity
Max Circuit HVACR
breaker size
1010 Single-Phase (Tecumseh AJA7490ZXDPN)
208-230 V, 60 Hz
10.7A 15A
1010 Single-Phase (Tecumseh ASFR9510ZNAMC1) 10.7A 15A
1410 Single-Phase (Tecumseh AWA9513ZXDPN) 19.3A 30A
1410 Single-Phase (Tecumseh ASFS9516ZNAMC1) 16.4A 25A
1010 3-Phase (Tecumseh AWA9490ZXTPN) 9.9A 15A
1010 3-Phase (Tecumseh ASFR9511ZFAMC1) 9.9A 15A
1410 3-Phase (Tecumseh AWA9517ZXTPN) 14.2A 25A
1410 3-Phase (Larkin AWA9517ZXTPN) 15A 15A
1410 3-Phase (Larkin LZT015M6CFIM) 15A 20A
Evaporator plumbing
§ 3/8" OD push-in water inlet (connection inside machine) - 3/8" OD tubing required.
§ Water shut-off recommended within 10 feet (3 m).
§ Follett recommends installation of Follett water lter system (part# 00130286) in ice machine inlet water line.
Flush drain plumbing
§ 3/4" MPT ush drain connection at the rear of the machine.
§ Drain must slope 1/4" inch per foot (6 mm per 30.4 cm).
§ Drain line should not be shared with any other piece of equipment.
§ Drain line cannot be reduced to a size smaller than 1 inch.
§ Drain should be piped without a vent.
Loading ...
Loading ...
Loading ...