Loading ...
Loading ...
Loading ...
5
5.3 Installation Precautions
All of the following installation methods are for reference only. EcoFlow only supplies some of the module installa-
tion and connection accessories (see packaging list for details), but it does not supply accessories for a complete
vehicle system installation. Any system installers should ensure that the installation complies with all specifications.
The product panel is made of flexible material with six holes (8 mm inside diameter) arranged at its edges, and can
be fixed using optional adapter bolts through the spare holes or by using a structural adhesive or gluing double-
sided adhesive foam tape on the back of the panel. Regardless of the installation method used, care should be
taken to leave gaps between the panels and the roof to maintain airflow and ensure good heat dissipation for
prolonged service life and power generation output.
Caution:
1. Modules should be securely mounted to withstand all expected loads, including wind and snow loads.
2. Dow Corning is the recommended structural adhesive brand and 3M is the recommended brand for double-
surface of the panel.
Each module has two labels that provide the following information:
Nameplate Sticker: Provides information on the product type, and the electrical parameters, weight, dimensions,
etc., measured under standard test conditions.
SN Code Sticker: Each module has a unique serial number.
Note: Do not remove any labels from the solar panel; removal of any labels voids the product warranty policy
from EcoFlow.
As shown below:
Nameplate Sticker
(SN Code Sticker)
Loading ...
Loading ...
Loading ...