Loading ...
Loading ...
Loading ...
9
HOW TO USE
Preparing the Carpet
1. Vacuum the carpet or upholstered furniture which is to be cleaned thoroughly
with a vacuum cleaner. If possible, use a brush attachment to do this.
2. If possible, remove all furniture from the carpet. In the case of large items of
furniture which cannot be moved to one side, place plastic film below or around
the feet and only remove it once the carpet has completely dried after it has
been cleaned. The feet could be damaged by the moisture from the carpet.
3. Check the colourfastness of the carpet or upholstered furniture. Soak a piece of
white fabric with the cleaning solution supplied (see the “Preparing the Device /
Filling the Fresh Water Container” section) and rub it carefully on an inconspicu-
ous spot on the carpet. If the white fabric does not become discoloured, the
carpet or upholstered furniture can be cleaned with the device. In the case of
carpets or upholstered furniture with several colours, test the fastness of each
colour.
Preparing the Device / Filling the Fresh Water Container
CAUTION: Only ever pour the cleaning agent supplied with the device or standard
carpet cleaning products for carpet cleaners into the fresh water container. Do not
use any cleaning products that produce a lot of foam as excessive foaming impedes
the functioning of the device.
1. Hold the handle of the clean water tank and
press “Clean Water Tank Release”. Tilt the clean
water tank away from the carpet washer and
remove.
2. Unscrew the measuring cap from the under side
of the clean water tank (don’t try to remove the
orange part. That is a handle, not a lid). Add the
water first, then the cleaning solution. 50ml
of solution to 500ml of water (10:1). Give the
tank a slight shake to mix the water and solu-
tion before refitting the tank.
Do not exceed the MAX level on the tank.
SC17310N_IMindd.indd 9 09/07/2020 13:12
Loading ...
Loading ...
Loading ...